Battery Charger: BC12-10A-SMPS / BC24-10A-SMPS

BC12-10A-SMPS / BC24-10A-SMPS
Model BC12-10A-SMPS / BC24-10A-SMPS
INPUT
AC INPUT VOLTAGE 220VAC, 1¯
AC INPUT WORKING RANGE 170VAC TO 270VAC
FREQUENCY 50Hz ± 6%
INRUSH CURRENT LIMITED BY NTC THERMISTER
SURGE VOLTAGE PROTECTION MOV
EMI/EMC EMI-RFI FILTER AT INPUT
OUTPUT :
VOLTAGE & CURRENT 12VDC / 24VDC (user selectable according to battery)
10 A Max. (user selectable in steps of 2A)
Static regulation ± 1 %
RMS CURRENT RIPPLE ² 5%
CHARGING PROFILE MULTI STEPS CHARGING (PLEASE SEE TABLE-1)
INDICATION & ALARM :
LCD DISPLAY PARAMETERS OUTPUT VOLTAGE
OUTPUT CURRENT
STEP NUMBER
SYSTEM VOLTAGE
CHARGER STATUS
BUZZER CHARGE FINISH
PROTECTIONS : BATTERY REVERSE PROTECTION.
SHORT CIRCUIT PROTECTION.
SPARK PREVENTION WHILE CONNECTING BATTERY CLIPS.
AUTOMATIC SHUT OFF WHEN BATTERY IS DISCONNECTED.
AC INPUT FUSE.
GENERAL
NUMBER OF BATTERY MAX. 2 NO OF 12V
CONTROL HIGH FREQUENCY PWM
COOLING SYSTEM fan cooled
OPERATING TEMPERATURE 0¡C TO 50¡C
RELATIVE HUMIDITY 95% MAXIMUM,NON CONDENSING
ALTITUDE 1500MTR AMSL
ENCLOSURE IP20
WEIGHT 2.0KG
DIMENSIONS( H x W x D ) 135mm X 130mm X 270mm
Since we are committed to continuous development of our products, the specification are subject to change without notice.


TABLE-1
FOR 12V SYSTEM
,2nd STEP (FLOAT)
CHARGING VOLTAGE,MAX. 13.5V
CHARGING CURRENT,MAX. 0.8A
TRANSITION CONDITION

FOR 24V SYSTEM
,2nd STEP (FLOAT)
CHARGING VOLTAGE, MAX. 27.0V
CHARGING CURRENT,MAX. 0.8A
TRANSITION CONDITION

“IN FLOAT MODE, IF VBATT < 12.8V / 25.6V, CHARGING PROCESS WILL START AGAIN." [/table] Specifications

Bookmark the permalink.