Sine Wave Home UPS: SI3548

SI3548
Type SINE WAVE
Models SI3548
INPUT
Input Voltage Range 100V ~ 300V(Wide input voltage range)
180V ~ 270V(Normal input voltage range)
Nominal Input Voltage(s) Supported 220V AC , 50Hz
Input connection type Hard Wire
BATTERY Full Load Runtime (minutes) Depends on Load & Battery AH
OUTPUT
Output Volt Amp Capacity(VA) 3500
Output Watt Capacity (watts) 2800
DC System Voltage (VDC) 48
Output Voltage 220V ±5%
Frequency Compatibility 50Hz ±2%
Load PF Range 0.8 Lagging
Load Capacity >110% faulty after 300ms
Phases 1Phase – 3 Wire (L.N.E)
Output AC waveform Pure Sine Wave
Efficiency > 88%
GENERAL
LCD / LEDs Indications UPS ON (Yellow), Battery Low (Red), Mains ON (Green),Charging (Green), Overload(Red)
Alarms Audible alarm indicates power failure and overload conditions
Switches 1)Switch control off/on power status
2)Switch for mains input voltage range
3)Switch to select the maximum charging voltage
Protection > 300% Load (with manual reset function)
Cooling Method Forced air cooled
Transfer time Battery to line mode : 15 milliseconds / Line to battery mode : 15 milliseconds
DIMENSIONS
Cabinet Dimensions(HxWxL)mm 352 X 225 X 350
Cabinet Weight (kg) 31.98
Shipping Dimensions(HxWxL)mm 200 X 320 X 400
Shipping Weight (kg) 33.1
Housing Material Powder coated / painted MS
ENVIRONMENTAL
Operating Temperature Range 0¡C to 50¡C
Relative Humidity 95% (non-condensing)
Degree of Protection IP 20
BATTERY
No of Battery 4
Battery Charging Profile(Boost /Foat) Suitable according to Battery type (eg:VRLA/SMF/Wet Lead Acid Battery)
Max Charging Current(when battery is fully discharge) 10A ±2amp
SPECIAL FEATURES
Cold Start (startup in battery mode during a power failure) Cold – start operation supported
CERTIFICATIONS
Quality Certifications ISO 9001:2008
WARRANTY
Product Warranty Period 1 – year limited warranty
Since we are committed to continuous development of our products, the specifications are subject to change without notice.

Specifications

Bookmark the permalink.